High Frequency 32-KW X - Ray Generator
- HRAY 32 is microcontroller Based Fixed Type X-ray machine with LCD display.
- Easy Operational and User friendly X-Ray Control Console with APR Mode.
- Internal wiring for protection against heat and fire by certified PVC wires.
- Powerful circuit design provides maximum mA and kVP output accuracy (actual result).
- Movements of Tube (Up & Down) easily controlled manually by static Column.
- Provided with 4 way Floating Table, Tube Stand & Vertical Chest Stand for easy
focus adjustment of Radiation.
Technical Specifications
Control Console
- Rectification of Generator High frequency
- Output Power 32kW
- Radiographic Parameters kkV Range 40 to 125kVp each steps
- Radiography Technique APR mode/Manual Mode
- mA Range 50mA, 100mA, 160mA, 200mA, 250mA, 320mA & 400mA
- mAs Range 1mAs to 320mAs (6.4 Seconds)
- Radiography Technique Manual Mode & APR Mode
- APR Mode Loaded with 32 programs for (3 Sizes of Body) Thin, Medium &Thick
X - Ray Tube
- Type of tube Roatating Anode X-ray tube (1 No’s)
- Nominal Tube Voltage 125kV (Maximum)
- Focal Spot Nominal focus: (Large – 2.0) (Small – 1.0)
- Max. Anode Heating Content 100kJ
- Permanent Filtration 0.9mm Al/75 kV
- Tube connection Through 8 core Cable & Pair of H.T. Cable
Installation Information
- Line Connection 230VAC, Single Phase, 50Hz from Three Phase to
Single Phase conversion Transformer - Power Consumption 32kW
- Dimensions Control Unit: (LxBxHmm) (500x585x450mm)
Console Unit: (LxBxHmm) (245x400x70mm)
Other Information
- Display LCD Display of size (LxBmm) (66x108mm)
- Table 4 way, 6 way Floating or Horizontal Bucky Table
- Chest Stand Provisional Available (Optional)
- Column Floor Mount or Floor to Ceiling Mount
Ease of operation:
You can directly select the mA, kV and mAs by pressing the keys of Operation panel, The control Unit change the values according to selectivity or you can also select the Anatomy for the Exposure in APR Mode (Anatomical Parameter Radiography).
Wide selection range:
You can choose the right combination of factors from 40kV to 125kV each steps and 1mAs to 320mAs in 26 steps and 50mA, 100mA, 160mA , 200mA, 250mA, 320mA, & 400mA to get the optimum image quality With a maximum output power of 32KW.
Better Image Quality:
The image quality depends on many factors such as consistent and accurate output shorter exposure time, HRAY 32 has the best combination of these features Hence, there is a large positive impact on the image quality.